Base, Supreme


P185/80R13

(click for a tire code explanation)

P

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

185 millimeters wide

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 185 indicates that this tire is 185 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 185mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

185mm / 25.4 = 7.28"

80%

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 80 means that the height is equal to 80% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 80 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 185mm and that its section height is 50% of 185mm. By converting the 185mm to inches (185 / 25.4 = 7.28") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 3.64".

R

Construction Method

Radial. The R in the P185/80R13 size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P185/80R13), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

13" wheel

Rim Size

The 13 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P185/80R13, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

Load Index/Service Description

NaNlb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

Speed Rating

mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P185/80R13) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

Base, Supreme


P205/70R13

(click for a tire code explanation)

P

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

205 millimeters wide

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 205 indicates that this tire is 205 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 205mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

205mm / 25.4 = 8.07"

70%

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 70 means that the height is equal to 70% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 70 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 205mm and that its section height is 50% of 205mm. By converting the 205mm to inches (205 / 25.4 = 8.07") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 4.04".

R

Construction Method

Radial. The R in the P205/70R13 size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P205/70R13), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

13" wheel

Rim Size

The 13 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P205/70R13, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

Load Index/Service Description

NaNlb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

Speed Rating

mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P205/70R13) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

Base, Supreme


P195/70R14

(click for a tire code explanation)

P

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

195 millimeters wide

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 195 indicates that this tire is 195 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 195mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

195mm / 25.4 = 7.68"

70%

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 70 means that the height is equal to 70% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 70 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 195mm and that its section height is 50% of 195mm. By converting the 195mm to inches (195 / 25.4 = 7.68") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 3.84".

R

Construction Method

Radial. The R in the P195/70R14 size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P195/70R14), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

14" wheel

Rim Size

The 14 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P195/70R14, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

Load Index/Service Description

NaNlb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

Speed Rating

mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P195/70R14) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

GT


P215/60R14

(click for a tire code explanation)

P

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

215 millimeters wide

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 215 indicates that this tire is 215 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 215mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

215mm / 25.4 = 8.46"

60%

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 60 means that the height is equal to 60% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 60 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 215mm and that its section height is 50% of 215mm. By converting the 215mm to inches (215 / 25.4 = 8.46") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 4.23".

R

Construction Method

Radial. The R in the P215/60R14 size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P215/60R14), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

14" wheel

Rim Size

The 14 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P215/60R14, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

Load Index/Service Description

NaNlb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

Speed Rating

mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P215/60R14) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

No vehicles found!

We could not find any vehicles matching the url requested. Please contact support@tiresizr.com
oldsmobile

Oldsmobile was a brand of American automobiles produced for most of its existence by General Motors. Olds Motor Vehicle Co. was founded by Ransom E. Olds in 1897. In its 107-year history, it produced over 35 million vehicles, including at least 14 million built at its Lansing, Michigan factory. When it was phased out in 2004, Oldsmobile was the oldest surviving American automobile marque, and one of the oldest in the world, after Daimler, Peugeot and Tatra.

Though it was discontinued in 2004, it still remains an active trademark of the General Motors Company.[1] The closing of the Oldsmobile division presaged a larger consolidation of GM brands and discontinuation of models during the company's 2009 bankruptcy reorganization.

Wikipedia