tire size detail
Intended Use Of Tire
Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.
The indicates that this tire is millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).
mm / 25.4 = NaN"
The ratio of the height of the tire's cross-section to it's width. 65 means that the height is equal to 65% of the tire's width.
Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.
The 65 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is mm and that its section height is 50% of mm. By converting the mm to inches ( / 25.4 = NaN") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of NaN".
Radial. The R in the 255/65R15 106V255/65VR15 size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.
If the R in the size was replaced with a D (255/65R15 106V255/65VR15), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.
The 15 indicates the tire and wheel diameter designed to be matched together.
Tires that have a rim diameter expressed in inches (255/65R15 106V255/65VR15, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.
Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.
Load Range/Ply Rating
This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.
Load Index/Service Description
NaNlb load. The tire assigned numerical value used to compare relative load carrying capabilities.
The VR represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.
mph. The maximum speed that the tire can sustain for 10 minutes.
Today, the only tires that continue to include the speed rating "in" the tire size (255/65R15 106V255/65VR15) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.
Bentley Motors Limited is a British manufacturer and marketer of luxury cars and SUVs—and a subsidiary of Volkswagen AG since 1998.
Headquartered in Crewe, England, the company was founded as Bentley Motors Limited by W. O. Bentley in 1919 in Cricklewood, North London—and became widely known for winning the 24 Hours of Le Mans in 1924, 1927, 1928, 1929, 1930, and 2003.
Prominent models extend from the historic sports-racing Bentley 4½ Litre and Bentley Speed Six; the more recent Bentley R Type Continental, Bentley Turbo R, and Bentley Arnage; to its current model line—including the Continental Flying Spur, Continental GT, Bentley Bentayga and the Mulsanne—which are marketed worldwide, with China as its largest market as of November 2012.
Today most Bentleys are assembled at the company's Crewe factory, with a small number assembled at Volkswagen's Dresden factory, Germany, and with bodies for the Continental manufactured in Zwickau and for the Bentayga manufactured at the Volkswagen Bratislava Plant.
The joining and eventual separation of Bentley and Rolls-Royce followed a series of mergers and acquisitions, beginning with the 1931 purchase by Rolls-Royce of Bentley, then in receivership. In 1971, Rolls-Royce itself was forced into receivership and the UK government nationalised the company—splitting into two companies the aerospace division (Rolls-Royce Plc) and automotive (Rolls-Royce Motors Limited) divisions—the latter retaining the Bentley subdivision. Rolls-Royce Motors was subsequently sold to engineering conglomerate, Vickers and in 1998, Vickers sold Rolls-Royce to Volkswagen AG.
Intellectual property rights to both the name Rolls-Royce as well as the company's logo had been retained not by Rolls-Royce Motors, but by aerospace company, Rolls-Royce Plc, which had continued to license both to the automotive division. Thus the sale of "Rolls-Royce" to VW included the Bentley name and logos, vehicle designs, model nameplates, production and administrative facilities, the Spirit of Ecstasy and Rolls-Royce grille shape trademarks (subsequently sold to BMW by VW)—but not the rights to the Rolls-Royce name or logo. The aerospace company, Rolls-Royce Plc, ultimately sold both to BMW AG.