Hybrid 4x4


P245/75R16 109S

(click for a tire code explanation)

P

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

245 millimeters wide

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 245 indicates that this tire is 245 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 245mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

245mm / 25.4 = 9.65"

75%

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 75 means that the height is equal to 75% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 75 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 245mm and that its section height is 50% of 245mm. By converting the 245mm to inches (245 / 25.4 = 9.65") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 4.83".

R

Construction Method

Radial. The R in the P245/75R16 109S size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P245/75R16 109S), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

16" wheel

Rim Size

The 16 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P245/75R16 109S, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

109

Load Index/Service Description

2201lb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The 109 represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

S

Speed Rating

180mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P245/75R16 109S) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

Hybrid 4x2


P235/75R16 106S

(click for a tire code explanation)

P

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

235 millimeters wide

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 235 indicates that this tire is 235 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 235mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

235mm / 25.4 = 9.25"

75%

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 75 means that the height is equal to 75% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 75 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 235mm and that its section height is 50% of 235mm. By converting the 235mm to inches (235 / 25.4 = 9.25") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 4.63".

R

Construction Method

Radial. The R in the P235/75R16 106S size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P235/75R16 106S), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

16" wheel

Rim Size

The 16 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P235/75R16 106S, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

106

Load Index/Service Description

2141lb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The 106 represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

S

Speed Rating

180mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P235/75R16 106S) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

HD, HD LS, HD LT


LT245/75R16/E 120S

(click for a tire code explanation)

LT

Intended Use Of Tire

Light Truck. If a tire size begins with LT, it signifies the tire is a light truck-metric size that was designed to be used on vehicles that are capable of carrying heavy cargo or towing large trailers. This includes medium and heavy-duty (typically 3/4- and 1-ton load capacity) pickup trucks, sport utility vehicles and full-size vans. Tires branded with the LT designation are the "little brothers" of 18-wheel tractor-trailer tires and are designed to provide substantial reserve capacity to accept the additional stresses of carrying heavy cargo.

245 millimeters wide

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 245 indicates that this tire is 245 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 245mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

245mm / 25.4 = 9.65"

75%

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 75 means that the height is equal to 75% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 75 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 245mm and that its section height is 50% of 245mm. By converting the 245mm to inches (245 / 25.4 = 9.65") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 4.83".

R

Construction Method

Radial. The R in the LT245/75R16/E 120S size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (LT245/75R16/E 120S), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

16" wheel

Rim Size

The 16 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (LT245/75R16/E 120S, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

E

Load Range/Ply Rating

This tire has a ply rating of 10 which indicates how much load the tire is designed to carry at it's specified pressure.

120

Load Index/Service Description

2424lb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The 120 represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

S

Speed Rating

180mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (LT245/75R16/E 120S) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

4x2, 4x4, LS 4x2, LS 4x4, LT 4x2, LT 4x4


P265/70R17 113S

(click for a tire code explanation)

P

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

265 millimeters wide

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 265 indicates that this tire is 265 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 265mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

265mm / 25.4 = 10.43"

70%

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 70 means that the height is equal to 70% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 70 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 265mm and that its section height is 50% of 265mm. By converting the 265mm to inches (265 / 25.4 = 10.43") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 5.21".

R

Construction Method

Radial. The R in the P265/70R17 113S size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P265/70R17 113S), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

17" wheel

Rim Size

The 17 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P265/70R17 113S, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

113

Load Index/Service Description

2282lb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The 113 represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

S

Speed Rating

180mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P265/70R17 113S) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

4x2, LS 4x2, LT 4x2


P245/70R17 108S

(click for a tire code explanation)

P

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

245 millimeters wide

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 245 indicates that this tire is 245 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 245mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

245mm / 25.4 = 9.65"

70%

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 70 means that the height is equal to 70% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 70 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 245mm and that its section height is 50% of 245mm. By converting the 245mm to inches (245 / 25.4 = 9.65") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 4.83".

R

Construction Method

Radial. The R in the P245/70R17 108S size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P245/70R17 108S), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

17" wheel

Rim Size

The 17 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P245/70R17 108S, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

108

Load Index/Service Description

2181lb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The 108 represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

S

Speed Rating

180mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P245/70R17 108S) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

SS


P275/55R20 111S

(click for a tire code explanation)

P

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

275 millimeters wide

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 275 indicates that this tire is 275 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 275mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

275mm / 25.4 = 10.83"

55%

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 55 means that the height is equal to 55% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 55 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 275mm and that its section height is 50% of 275mm. By converting the 275mm to inches (275 / 25.4 = 10.83") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 5.42".

R

Construction Method

Radial. The R in the P275/55R20 111S size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P275/55R20 111S), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

20" wheel

Rim Size

The 20 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P275/55R20 111S, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

111

Load Index/Service Description

2242lb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The 111 represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

S

Speed Rating

180mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P275/55R20 111S) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

No vehicles found!

We could not find any vehicles matching the url requested. Please contact support@tiresizr.com
chevy

Chevrolet, colloquially referred to as Chevy and formally the Chevrolet Division of General Motors Company, is an American automobile division of the American manufacturer General Motors (GM). Louis Chevrolet and ousted General Motors founder William C. Durant started the company on November 3, 1911 [2] as the Chevrolet Motor Car Company. Durant used the Chevrolet Motor Car Company to acquire a controlling stake in General Motors with a reverse merger occurring on May 2, 1918 and propelled himself back to the GM presidency. After Durant's second ousting in 1919, Alfred Sloan, with his maxim "a car for every purse and purpose," would pick the Chevrolet brand to become the volume leader in the General Motors family, selling mainstream vehicles to compete with Henry Ford's Model T in 1919 and overtaking Ford as the best-selling car in the United States by 1929.[3]

Chevrolet-branded vehicles are sold in most automotive markets worldwide, with the notable exception of Oceania, where GM is represented by its Australian subsidiary, Holden. In 2005, Chevrolet was relaunched in Europe, primarily selling vehicles built by GM Daewoo of South Korea with the tagline "Daewoo has grown up enough to become Chevrolet", a move rooted in General Motors' attempt to build a global brand around Chevrolet. With the reintroduction of Chevrolet to Europe, GM intended Chevrolet to be a mainstream value brand, while GM's traditional European standard-bearers, Opel of Germany, and Vauxhall of United Kingdom would be moved upmarket.[4] However, GM reversed this move in late 2013, announcing that the brand would be withdrawn from Europe, with the exception of the Camaro and Corvette[5] in 2016. Chevrolet vehicles will continue to be marketed in the CIS states, including Russia. After General Motors fully acquired GM Daewoo in 2011 to create GM Korea, the last usage of the Daewoo automotive brand was discontinued in its native South Korea and succeeded by Chevrolet.

In North America, Chevrolet produces and sells a wide range of vehicles, from subcompact automobiles to medium-duty commercial trucks. Due to the prominence and name recognition of Chevrolet as one of General Motors' global marques, Chevrolet, Chevy or Chev is used at times as a synonym for General Motors or its products, one example being the GM LS1 engine, commonly known by the name or a variant thereof of its progenitor, the Chevrolet small-block engine.

Wikipedia