Intended Use Of Tire

Light Truck. If a tire size begins with LT, it signifies the tire is a light truck-metric size that was designed to be used on vehicles that are capable of carrying heavy cargo or towing large trailers. This includes medium and heavy-duty (typically 3/4- and 1-ton load capacity) pickup trucks, sport utility vehicles and full-size vans. Tires branded with the LT designation are the "little brothers" of 18-wheel tractor-trailer tires and are designed to provide substantial reserve capacity to accept the additional stresses of carrying heavy cargo.

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 265 indicates that this tire is 265 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 265mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

265mm / 25.4 = 10.43"

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 70 means that the height is equal to 70% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 70 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 265mm and that its section height is 50% of 265mm. By converting the 265mm to inches (265 / 25.4 = 10.43") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 5.21".

Construction Method

Radial. The R in the LT265/70R16/D 117Q size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (LT265/70R16/D 117Q), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

Rim Size

The 16 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (LT265/70R16/D 117Q, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of 8 which indicates how much load the tire is designed to carry at it's specified pressure.

Load Index/Service Description

2363lb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The 117 represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

Speed Rating

160mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (LT265/70R16/D 117Q) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 245 indicates that this tire is 245 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 245mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

245mm / 25.4 = 9.65"

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 70 means that the height is equal to 70% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 70 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 245mm and that its section height is 50% of 245mm. By converting the 245mm to inches (245 / 25.4 = 9.65") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 4.83".

Construction Method

Radial. The R in the P245/70R16 106S size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P245/70R16 106S), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

Rim Size

The 16 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P245/70R16 106S, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

Load Index/Service Description

2141lb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The 106 represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

Speed Rating

180mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P245/70R16 106S) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 255 indicates that this tire is 255 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 255mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

255mm / 25.4 = 10.04"

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 65 means that the height is equal to 65% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 65 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 255mm and that its section height is 50% of 255mm. By converting the 255mm to inches (255 / 25.4 = 10.04") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 5.02".

Construction Method

Radial. The R in the P255/65R16 106S size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P255/65R16 106S), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

Rim Size

The 16 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P255/65R16 106S, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

Load Index/Service Description

2141lb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The 106 represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

Speed Rating

180mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P255/65R16 106S) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 265 indicates that this tire is 265 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 265mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

265mm / 25.4 = 10.43"

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 70 means that the height is equal to 70% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 70 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 265mm and that its section height is 50% of 265mm. By converting the 265mm to inches (265 / 25.4 = 10.43") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 5.21".

Construction Method

Radial. The R in the P265/70R16 111S size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P265/70R16 111S), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

Rim Size

The 16 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P265/70R16 111S, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

Load Index/Service Description

2242lb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The 111 represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

Speed Rating

180mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P265/70R16 111S) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.

Intended Use Of Tire

Passenger Vehicle. When a tire size begins with a P, it signifies the tire is a p-metric size that was designed to be fitted on vehicles that are primarily used as passenger vehicles. This includes cars, minivans, sport utility vehicles and light duty pickup trucks (typically 1/4- and 1/2-ton load capacity). The use of p-metric sizes began in the late 1970s and they are the most frequently used type of tire size today.

Tire Width

Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's section width/cross section in millimeters.

The 265 indicates that this tire is 265 millimeters across from the widest point when mounted and measured on a specified width wheel. Because many people think of measurements in inches, the 265mm can be converted to inches by dividing the width in millimeters by 25.4 (the number of millimeters per inch).

265mm / 25.4 = 10.43"

Aspect Ratio

The ratio of the height of the tire's cross-section to it's width. 65 means that the height is equal to 65% of the tire's width.

Typically, following the three digits identifying the tire's width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio.

The 65 indicates that this tire size's sidewall height (from rim to tread) is 50% of its width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall. The lower the number, the lower the sidewall. We know that this tire size's section width is 265mm and that its section height is 50% of 265mm. By converting the 265mm to inches (265 / 25.4 = 10.43") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 5.21".

Construction Method

Radial. The R in the P265/65R17 110S size identifies that the tire has a radial construction in which the tire's plies "radiate" out from the center of the wheel. Radial tires are by far the most popular type of tire today representing over 98% of all tires sold.

If the R in the size was replaced with a D (P265/65R17 110S), it would identify that the internal tire body plies crisscross on a diagonal and that the tire has a "bias ply" construction. Tires using this construction are for light truck and spare tire applications.

Rim Size

The 17 indicates the tire and wheel diameter designed to be matched together.

Tires that have a rim diameter expressed in inches (P265/65R17 110S, as well as 8, 10, 12, 13, 14,15, 17, 18, 19, 20, 22, 23, 24, 26 and 28) are called "inch rim" sizes. These are the most common types of tire sizes and are used on most cars, minivans, vans, sport utility vehicles and light duty light trucks.

Tires and wheels with unique rim diameters should never be combined with traditional "inch rim" tires and wheels.

Load Range/Ply Rating

This tire has a ply rating of which indicates how much load the tire is designed to carry at it's specified pressure.

Load Index/Service Description

2222lb load. The tire assigned numerical value used to compare relative load carrying capabilities.

The 110 represents the tire's service description. A service description identifies the tire's load index and speed rating. Service descriptions are required on all speed rated (except for Z-speed rated) tires manufactured since the early 1990s.

Speed Rating

180mph. The maximum speed that the tire can sustain for 10 minutes.

Today, the only tires that continue to include the speed rating "in" the tire size (P265/65R17 110S) are Z-speed rated tires. In this case, following the two digits used to identify the aspect ratio are the letters ZR to identify the tire's speed rating (Z) and its internal construction (R). Since 1991, all other speed ratings are identified in the tire's Service Description.